Monohull · 6 documented fitments
Propeller upgrade for the Rival 32 — what fits, what changes.
Drawn from 6 documented Rival 32 fitments: the common setup is a Varifold 3-blade around 406 mm behind the Yanmar 3GM30. Typical result: 300–400 fewer RPM at cruise and up to 20% fuel saved over fixed pitch.
The fitment card
Documented engine variants & what they wear
Aggregated from 6 real installations — not a size chart, a service record.
| Engine | Power / max RPM | Drive | Typical ratio | Documented propeller | Rotation | Records |
|---|---|---|---|---|---|---|
| Yanmar 3GM30 | 27 hp / 3600 | Shaft | 2.62:1 | Varifold 3-blade · 406 mm | Right-hand | 2 |
| Beta Marine BD 722 | 18 hp / 3000 | Shaft | 2:1 | Autoprop H5 | Right-hand | 1 |
| Beta Marine 25 | 25 hp / 3600 | Shaft | 2:1 | Autoprop H5 | Right-hand | 1 |
| Bukh DV20 | 20 hp / 3000 | Shaft | 2.47:1 | Autoprop H5 | Right-hand | 1 |
| Nanni N3.21 | 21 hp / 3600 | Shaft | 2.62:1 | Autoprop H5 | Right-hand | 1 |
Indicative only — gearboxes and apertures vary between years and repowers, which is why every supplied propeller is verified against your boat first. Data current as of 2026.
Your numbers
What the change feels like on a Rival 32
Indicative curves for this size of boat — drag the cruise line. The independent-test pattern: the same six knots on several hundred fewer RPM, with the fuel flow following.
Worth knowing
Considerations for the Rival 32
- 5 engine variants are documented for this model — repowers included. Sizing follows your engine and ratio, not the year in the brochure.
- Tip clearance rules the maximum diameter — roughly 10–15% of prop diameter to the hull. The Builder asks; we verify before supply.
Rival 32 propeller questions
What size propeller does a Rival 32 take?
Documented Rival 32 installations most commonly run a Varifold 3-blade around 406 mm, matched to the Yanmar 3GM30 on a shaft drive. Exact size depends on your engine, gearbox ratio and aperture — every recommendation is verified by an engineer before supply.
How much fuel would a Rival 32 save with an Autoprop?
Typical savings over a fixed-pitch propeller are up to 20% at cruise (documented band 15–30%, honestly less if you already run a folding or feathering prop). Put your engine hours and diesel price into the fuel calculator for your own numbers — then the Builder for a verified recommendation.
My Rival 32 has a different engine than shown — does the data still help?
Yes. Repowers are common and the database usually holds several engine variants per model. The Builder starts from your actual engine and gearbox; the model records confirm diameters and clearances that are known to work on this hull.
Get the verified recommendation for your Rival 32
The Builder pre-fills from these 6 documented fitments — confirm your engine and gearbox, and an engineer replies within one business day.