Skip to content
BRUNTONSAustralia

Monohull · 23 documented fitments

Propeller upgrade for the Jeanneau SO 349 — what fits, what changes.

Drawn from 23 documented Jeanneau SO 349 fitments: the common setup is an Autoprop H5 behind the Yanmar 3YM20. Typical result: 300–400 fewer RPM at cruise and up to 20% fuel saved over fixed pitch.

The fitment card

Documented engine variants & what they wear

Aggregated from 23 real installations — not a size chart, a service record.

EnginePower / max RPMDriveTypical ratioDocumented propellerRotationRecords
Yanmar 3YM2021 hp / 3600Shaft2.62:1Autoprop H5Right-hand23

Indicative only — gearboxes and apertures vary between years and repowers, which is why every supplied propeller is verified against your boat first. Data current as of 2026.

Your numbers

What the change feels like on a Jeanneau SO 349

Indicative curves for this size of boat — drag the cruise line. The independent-test pattern: the same six knots on several hundred fewer RPM, with the fuel flow following.

Jeanneau SO 349 — speed over RPM, current fixed prop vs Autoprop
024601k2k3kknengine RPMAT 5.7 KN CRUISE26902314 rpm (380)
Fixed 3-bladeAutoprop

Worth knowing

Considerations for the Jeanneau SO 349

  • Tip clearance rules the maximum diameter — roughly 10–15% of prop diameter to the hull. The Builder asks; we verify before supply.

Jeanneau SO 349 propeller questions

What size propeller does a Jeanneau SO 349 take?

Documented Jeanneau SO 349 installations most commonly run an Autoprop H5, matched to the Yanmar 3YM20 on a shaft drive. Exact size depends on your engine, gearbox ratio and aperture — every recommendation is verified by an engineer before supply.

How much fuel would a Jeanneau SO 349 save with an Autoprop?

Typical savings over a fixed-pitch propeller are up to 20% at cruise (documented band 15–30%, honestly less if you already run a folding or feathering prop). Put your engine hours and diesel price into the fuel calculator for your own numbers — then the Builder for a verified recommendation.

My Jeanneau SO 349 has a different engine than shown — does the data still help?

Yes. Repowers are common and the database usually holds several engine variants per model. The Builder starts from your actual engine and gearbox; the model records confirm diameters and clearances that are known to work on this hull.

Get the verified recommendation for your Jeanneau SO 349

The Builder pre-fills from these 23 documented fitments — confirm your engine and gearbox, and an engineer replies within one business day.